The Temp Sensor is an integrated temperature monitor that provides real-time temp tracking so you know exactly how cold your cooler is.
Here we show you how to mount the Temp Sensor to your cooler.
IMPORTANT! Carefully follow each step of the assembly to ensure a proper fit.
IN THE BOX
1 × Temp Sensor (with temperature probe)
1 × Probe Cover
Battery (Installed, type CR1632)
Alcohol wipe
STEP 1 – LEAVE RUBBER SEAL IN PLACE, and clean inside cooler surface with Alcohol Wipe.
STEP 2 – Remove backing and attach self-adhesive Probe Cover.
STEP 3 – Lift and detach front section of Rubber Seal.
STEP 4 – Remove Lid Fix by pulling out Locking Pins..
STEP 5 – Loosely position Temp Sensor (do not insert pins yet).
STEP 6 – Insert Temperature Probe into Probe Cover.
STEP 7 – Re-attach Rubber Seal securely (make sure it snaps into place).
STEP 8 – Make sure the Rubber Seal sits behind the Temp Sensor, and push Temp Sensor on to mounting tabs and secure with Locking Pins.
WAKE
Press button once - wake display from sleep (will stay on for 24hrs after last button press).
SHOW EXTERNAL (AMBIENT) TEMP
Press button once (after wake) to switch from internal to external temp (display is white when showing external temp).
°C / °F
SWITCH : Hold button more than 3 seconds (switches to alternate temp scale °C / °F).
QUICK VIEW : Hold button in for about one second will switch temp. (Switches back after about 10 seconds).
Battery should last 24 months with normal usage.
